SETTING ANA/DIGI WATCH

TO SET DIGITAL TIME AND CALENDAR
In normal time display press and hold S3 for 3 seconds, alarm time flashing.
Press S3 again to enter time setting mode with seconds flashing
Press S2 to reset second digits to zero – note this will increase the minute by 1 minute if digits were between 30-59 seconds.
Press S1 – minutes flashing, Press S2 to adjust
Press S1 – hour flashing, press S2 to adjust
Press S1 – month flashing, press S2 to adjust
Press S1 – date flashing, press S2 to adjust
Press S3 to confirm settings.
To change time display format in normal time display press and hold S2 and then press S3 to toggle between 12 hour (A = AM, P = PM) or 24 hour format.

AnaDigi.jpg

TO CHANGE CALENDAR FORMAT
In normal time display press and hold S1 and then press S2 to toggle between “month – date” or “date – month” formats.
In normal time display, press and hold S1 to view calendar. Release to return to normal time display

TO SET ALARM TIME
In normal time display press and hold S3 for 3 seconds,
Alarm time hour flashing – press S2 to adjust
Press S1 – minutes flashing, press S2 to adjust
Press S3 to confirm.
Alarm now armed with (&) symbol showing. In normal time display press and hold S2 to view alarm time. Release to return to normal time display.

TURN ALARM (&) AND HOURLY CHIME ($) ON/OFF
In normal time display press and hold S2 then press S1 to turn alarm on (&) symbol showing and daily alarm on ($) symbol showing or alarm and hourly chime off, no symbol showing.
When the alarm sounds, press S2 or S3 to disarm.

TO USE CHRONOGRAPH
In normal time display press S3 once
Press S1 to start/stop count
When stopped, press SS2 to reset
During count, press S2 for split count, press S1 to stop then S2 to show split count.
Press S2 again to reset
Press S3 to return to normal time display.

TO USE BACKLIGHT
Press S1 to illuminate back light for aprox 4 seconds