SETTING THE TIME
Pull the crown out to position 3 (second click). Turn the crown clockwise to set hour and minute hands.
After the time has been set, push the crown back to normal position 1.
SETTING THE DATE
Pull the crown out to position 2 (first click) Turn the crown clockwise to set the date. (If the date is set between the hours of around 9:00PM and 1:00AM, the date may not change on the following day).
After the date has been set, push the crown back to normal position 1.
USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/20 second united up to a maximum of 59 minutes, 59 seconds. The chronograph 1/20 second hand keeps continuoiusly for 30 seconds after starting, and then stops at zero position.
USING THE STOPWATCH
Press button A to start the chronograph.
The chronograph can be started and stopped each time Button A is pressed. Press button B to reset the chronograph and chronograph minute and second hands return to their zero positions.
This procedure should be performed when the chronograph second hand does not return to the zero position.
Pull the crown out to position B (Second click).
Press the button A once to get the chronograph second hand to the zero position.
Press the button B once to get the chronograph 1/20 hand to the zero position. (The chronograph hands can be advanced rapidly by continuously pressing button A or B.
Once the hands are set at zero position, reset the time and return to the normal position.